Condar’s Catalytic Meters are designed for insertion into the stove itself, so that the end of the probe is approximately ½-inch behind the catalytic combustor.  Please follow the instructions provided by your stove manufacturer for installation and usage.

After installing your Catalytic Meter, engage the combustor, and watch the temperature readings for a couple of minutes.  When the combustor is properly activated, the temperature will steadily rise from around 500° up to 1500° Fahrenheit, depending on the design of your stove and the placement of the probe.

Guidelines for Temperature Readings
Consult your stove manufacturer's manual for precise temperature recommendations.  See below for approximate guidelines, dependent upon proper installation.

500°F to 1000°F (260°C to 538°C): Engage the combustor

1000°F to 1500°F (538°C to 816°C): Best operating temperature

Above 1500°F (816°C): Too hot