The Condar Millistat is specifically designed for millivolt hearth applications.  When it's turned off, it's off – no chance of accidental firings or flare-ups.  When it's on, simply set the temperature indicator for more or less heat.  Choose YOUR comfort level.
 
The Millistat works on both gas fireplaces and gas logs.  It is simple to use.  No remote control to lose.  No bulky thermostat designed for multiple applications.  Just install your Millistat five feet above the floor on a partitioned wall with plenty of free airflow.  (Always keep thermostats away from outside walls and open drafts for best results.)
 
With the Millistat, you're comfortable and safe.  By utilizing the pilot's "self generation" millivoltage power from the appliance burner, the Millistat simply breaks the circuit when the temperature rises above your desired level. 
 
Installation is easy.  Just attach the Millistat to the wall using enclosed mounting screws and fasten wires to the terminals on the back of the Millistat base.
 
Use for gas logs with a pilot generator output between 250 and 750 millivolts.  (Consult your gas logset installation manual for information about pilot generator output.)